RF Wireless Symphony LED Controller (HK-LDC-A01) is suit for UCS1903 (TM1804 etc) output applications which drive LED directly. It is widely used in advertising, stage sets, home decorations, etc.It has a memory function. Meanwhile, you could adjust brightness, static color choices and various dynamic changes in lighting effects through wireless remote control. It can also be used as a synchronous controller. That is to say you can synchronously control number of decoders and LED lights.
Supports many industry standard "Dream Color" "Magic" or "Digital" Addressable LED control chips:
NOTE: Please help to advice your strip IC type when ordering.
Technical Parameters of the Controller
Working temperature: -20-60℃
Supply voltage: DC5V/DC12V/24V
External dimension: L137*W70*H25 mm
Packing size: L137*W80*H54mm
Net weight: 180g
Gross weight: 270g
Effects model: 133
Maximum control points: 1024 (Low-speed) points, 2048 (High-speed) points
Controlled IC Model: Such as the TM1803, TM1804, TM1809 , TM1812,UCS1903, WS2812 etc. (specify the required model on orders)
Technical Parameters(remote control):
Power supply: AAAA battery * 1pcs (not included)
Cover material: ABS
External dimension: L87*W37*H16 mm
On/off: Turn on/off
Mode/Speed : Mode adjustment / speed adjustment function switch.
UP: Mode+/Speed+ button. When in mode regulator function, it is for “Mode+”. When in speed regulator function, it is for “Speed+”.
DOWN: Mode-/Speed- button. When in mode regulator function, it is for “Mode-”. When in speed regulator function, it is for “Speed-”.
(The Same Button on the Remote has the same function as on the Controller Panel)
How to Set Up
***To set up the controlling points(pixel points)
1. Get the the strip connected to the controller, and power on
2. Press the "on/off" button once, the digital screen on the controller panel will go black
3. Then press the "up" and "down" button together and hold until the digital screen with 4 numbers on, then loose the button
4. Now you can press the "up" or "down"to adjust the numbers to set up the controlling pixel points. We suggest to set the number to the bigggest, so will not miss any LEDs on the strip
***To adjust to differnt lighting mode
The controller has preseted wiht 132 lighting mode. Press the "mode/speed" button once, when the digital screen shows up with 4 figure,the first one is H, means for Mode Changeable. Now you can press "up" or "down" button to exchange from different lighting mode. For details please follow the lighting mode table below.
***To adjust to speed of lighting mode
Press the "mode/speed" button once, when the digital screen shows up with 4 figure,the first one is S, means for Speed Adjustable. Now you can press "up" or "down" button to adjust the speed of dynamic lighting mode.
Note: One of this controller can max control 2048 pixel points, if the strip spec. exceed this number, and there are more strips you want to run by the same single controller, you can add amplifiers.
Pre-set Lighting Mode Table
- Additional Information
length_ballast_type N/A Length No strip_model_length N/A Voltage_Amperage_Wattage No Aluminum_Channel_Code No FreeShipping No